Hello all. (thisone is in english, but reply in Dutch is ok)
I'm experienced Enigma2 enduser (DM8000).
I always used simple DisEqC A/B/C/D configuration.
But now i try to use advanced configuration. Because in this way i can give in OE2.0.X a Plugged in DVB-S2 tuner higher priority then the onboard DVB-S2 tuners.
In Simple configuration it always worked, but i need help with advanced configuration, because i do something wrong with result tune faillure.
I have 4 twin universal lnb's with two 4/1 switches.
Port A = 19.2e
Port B = 28.2e
Port C = 23.5e
Port D = 13.0e
It works perfect under simple configuration.
In advanced i have this:
Configuration mode = Advanced
Satellie = 13.0e with LNB = LNB4 with Committed DiSEqC-command Input4
Satellite = 19.2e with LNB = LNB1 with Committed DiSEqC-command Input1
Satellite = 23.5e with LNB = LNB3 with Committed DiSEqC-command Input3
Satellite = 28.2e with LNB = LNB2 with Committed DiSEqC-command Input2
rest is same on positions:
Priority = 1
LOF = Universal LNB
Voltage mode = Polorization
Tone mode = Band
Increased voltage = no
DiSEqC mode = 1.0
Toneburst = no
Fast DiSEqC = no
Sequence repeat = no
Command order = committed, toneburst
Rotor is exclusively controlled by dreambox = no
SCPC optimized search range = yes
Now is their something wrong here compared to a simple DiSEqC A/B/C/D config?